Product Description 

 3M766 A general purpose hazard marking vinyl tape for use in non-critical applications.

Printed in black and yellow stripes.

Physical Properties

Adhesive Type：Rubber

Backing： Polyvinyl Chloride

Total Tape Thickness： 5.0 mils(0.125mm) nominal

Tape Colour： Black and Yellow Stripes

Shelf Life： 12 months from date of despatch by 3M when stored in the original carton at 21°C (70°F) & 50 % Relative Humidity.

Application Ideas

· Marking of equipment pinch points or gears for warning purposes.

· Temporary floor marking around equipment or spills.

Performance Characteristics 

Adhesion to Stainless Steel ASTM D-3330：18 oz. / in. width 2.1 N/10mm

Tensile Strength at Break ASTM D-3659 ：13 lbs. /in. 22.8 N/10mm

Elongation at Break ASTM D-3659：180 %

General Information

· While vinyl tapes resist most common solvents, care should be taken to avoid ketones, chlorinated hydrocarbons and esters found in lacquers, thinners, degreasers, paint strippers, etc. which may cause the backing to swell or curl.

· Best results are attained when applied to clean, dry surfaces between 60°-85°F (15°-27°C)

Features

Top side printed vinyl backing.Rubber adhesive.

Advantages

Conformable to many surfaces.Black and Yellow Stripes.

Benefits

Good for marking many areas and equipment. Designates hazardous areas.Adheres well to many surfaces.